Microscopio de operación

Número de modelo: LZJ-5D

Caraterísticas & Especificaciones de Microscopio de operación:

USO

Model LZJ-5D ophthalmic surgical microscope, can be applied to microscopic surgery. 
Second, characteristics and main performance index 
(a) characteristics :
1 and the Lord microscope using parallel light electric five file variable times technology, binoculars barrel to 45 °. Instrument imaging is clear, the depth of field is big, a wide field of vision, working distance for 200 mm. 
2, binocular assistant mirror and the main microscope into 90 DHS position. 
3, instrument using coaxial cold light source inside lighting system, intensity of illumination was 50000 lx. 
4, instrument optional monochrometer interface, can match monocular teach mirror, photographic interface, CCD camera interface. 
(2) the main performance index 

1, （Eye surgical microscope,Eye operation microscope,Eye surgery microscope,Eye Operating microscope）primary mirror 
　

2, （Eye surgical microscope,Eye operation microscope,Eye surgery microscope,Eye Operating microscope）assistant mirror

* the Lord, deputy microscope eye distance regulating range 55 ~ 75 mm 
* trimming focal range 35 mm 
* cross arm maximum extension length of 1080 mm 
* frame vertical lift range 450 mm 
* lighting spot diameter Φ 65 mm 
* microscope before and after the pitch range not less than ± 30 ° 
3, （Eye surgical microscope,Eye operation microscope,Eye surgery microscope,Eye Operating microscope）

optical parameters 
3.1 optical system between the magnification difference is not more than 1.5%. 
3.2 optical system between the field consistency: things mirror in-plane vertical migration quantity is not more than 0.2 mm, horizontal offset no greater than 0.4 mm. 
3.3 or so between the optical system of the focal length difference is not more than 5 mm. 
3.4 the highest times field resolution not less than 63 line/mm. 
3.5 or so between the field like inclined not greater than 2 °. 
3.6 optical system exit pupil height difference set visibility moment value in the 0 bit not more than 1.5 mm. 
3.7 distance minimum adjusting range 55-75 mm. 
3.8 visibility minimum adjusting range + 5 - - 5 m - 1. 
3.9 field relative tolerance is not more than 2.5%. 
3.10 object surface spot center illumination not less than 15000 lx. 

4, （Eye surgical microscope,Eye operation microscope,Eye surgery microscope,Eye Operating microscope）mechanical properties 
Micro lift range not less than 35 mm. 
Each activity joint operation should be smooth and flexible, accurate positioning, Lock the stable and reliable, and can not have jitter, automatic sink or card hysteresis. Frame in any position should be in good balance. 
　

5, （Eye surgical microscope,Eye operation microscope,Eye surgery microscope,Eye Operating microscope）electrical properties 
Safety category: I kind of equipment. Single-phase network power supply: 220 v, 50 hz. 
Input power 220 va, fuse capacity of 1.5 A x 2, A multiply one. 
5.1 surgery microscope work when the noise is not more than 65 db. 
5.2 protective grounding impedance of not more than 0.2 Ω. 
5.3 normal operating temperature of the earth leakage of not more than 0.5 mA, a single fault condition should be not more than 1 mA 
5.4 normal working temperature dielectric strength: 
A) network power section and has protective earthing shell parts should be able to withstand between 50 hz and 1500 v sine wave test voltage 1 min, no breakdown and flashover phenomenon (a - al); 
B) intermediate circuit (transformer secondary 21 v winding and shell between) should be able to withstand 50 hz and 500 v sine wave test voltage 1 min, no breakdown and flashover phenomenon (A - al). 
5.5 foot switch used in the operating room with prevention into liquid requirements. 
5.6 the technical description and specification merger. Users to repair if need relevant technical data, can all alone to manufacturer line take. 
5.7 this equipment no electromagnetic compatibility special requirements, portable and mobile RF communication equipment had no effect on this equipment. This equipment without source and electrostatic put power supply, this system for attachment within the increase and change will not lead to the increase of the launching equipment and immunity to reduce. The equipment should not and other equipment close or layers use, if you must close or layers use, should be observed verification in the use of the configuration can be normal operation. Three, installation 
1, open the packing container, check whether conform to physical and packing list. 
2, first will stand for good, will microscope lens (the Lord, deputy microscope) take out, it will be on the left a shaft insertion bending plate of the bottom of hole, and the handwheel binding, again will screw admiral shaft and bending plate binding, and the last in the after electrify check each function is normal use, such as no problems can be pushed into the operating room to use. 
　

Four, method of use 
(1), in the surgery microscope after the installation, push them to the right position surgery, on the base of the two brake, lock instrument, in case microscope in surgery about. If you want to loosen, please tread down locking lever next to the pedal, the locking lever will advance pop-up, thus loosen instrument, this instrument can move freely. 
(2), switch on the power, open frame on the power switch. 
(3), loosen the frame of all a tight the handwheel (see chart 1), mobile lens to surgery surface (observation surface) above (or front) work focal length place (as the lens focal length decide) until the eyepiece can see the observation surface so far, lock on the frame of the handwheel. 
(4) and adjust the master with the hand lens of the eye from the size (figure 1, 8), to suit your distance. 
(5), regulating drum become times the handwheel (figure 1, 6), to the over-error of 2.5 (the largest magnification). 
(6), by foot pedal control lens micro lifting device, until see things surface. 
(7), may be around eyes vision not consistent, the eyepiece of about objective image definition is differ, right now but screwing in or spin out side of the eyepiece. 
Note: the left ocular diopter position and distance size on everyone basic is fixed, adjusted the is not allowed to adjustment, such as surgery surface does not clear phenomenon, can adjust working distance. (FIG. 5, 13) 
(8), 6 x assistant mirror: binocular assistant mirror and primary mirror into 90 DHS position, according to need to turn to the right or left of the primary mirror, as long as assistant mirror turn to the left or right position, and the main mirror into 90 DHS postures, adjust good visibility and distance were observed. 
(9), in the surgeon clear observation, assistant mirror observer can't see clearly like, and the surgeon is different, can adjust the ocular diopter, until clear so far. In the process of operation assistant mirror users without the consent of the the surgeon is can't literally adjust the working distance. 
(11), the choose and buy a (teach mirror, camera, camera device) use. 
(1), loosen 45 º eyepiece group at the bottom of a screw, take off the eyepiece group. 
(2), optical splitter inserted his lens, location is good, tighten the monochrometer a screw. 
(3), will eyepiece group insert optical splitter, location is good, tighten the eyepiece group a screw. 
(4), will teach mirror insert monochrometer interface (or so all can), optical splitter another side interface insert camera or camera interface, would connect the handwheel tightening, and then put the camera or CCD camera. 
(5), and CCD camera with signal wire and monitor and video equipment connection, can be realized in the process of operation SheLuXiang. 
(12), after using it, you should turn off light switch, then turn off the power switch. 
(13), in lamp: loosen bearing arm side department of the four screws (figure 1, 12), upward force pull out, can change the light bulbs, in good again after the original direction insert, screw on screw can. 
Five, maintenance and matters need attention 
(a) maintenance 
1, use and storage instrument place (generally refers to the operating room), should be kept clean, pay attention to dust, moistureproof, acid and alkali resistant, etc have corrosion volatile matter qualitative erosion. Use after application dust shroud live. 
2, special attention should be paid to keep the optical lens clean, fingers are not allowed to touch the optical lens surface. If the lens surface dust, usable and clean brush or brush wiped the, also can use a handkerchief to wipe gently. If not careful hand met or oil pollution, usable cotton wool with a small amount of ethyl ether ethanol mixture (ethanol 30% ethyl ether 70%) is brushed try, wipe try don't let the mixture into the lens inside. In order to avoid lens degumming or mildew. 
3, optical fiber is made of many glass composition, unfavorable had large bending force, need bending, curve radian but small (90 ° above), in order to avoid broken, influence through light, deposit should bend coil. 
(2) the matters needing attention 
1, this instrument is Ⅰ class B equipment, request supply network power supply (220 v ± 22 v, 50 hz ± 1 hz) has a good grounding line, and when using please be checked, lest cause security risk. Instrument maximum input power 220 va. 
2, when replacing the fuse please close instrument power switch, unplug the power plug, change the specifications of the fuse tube, in case produce security risk. 
3, in the operation such as a bulb is damaged, it should be timely enable spare lamp lighting, change bulb must be in stop 30 minutes after tight, in order to avoid high temperature scald. 
4, instrument on the various handwheel when use must be binding, in order to avoid accident. On the frame regulating balance force size the handwheel at the balance arm after adjustment is not active. 
5, the instrument attached electric schematic diagram for reference only maintenance, are subject to change without prior notice. 
6, (Eye surgical microscope,Eye operation microscope,Eye surgery microscope,Eye Operating microscope)instruments and normal working condition 
A) environment temperature 5 ℃ ~ 35 ℃; 
B) relative humidity 30% ~ 80%; 
C) the atmospheric pressure 700 hpa ~ 1060 hpa. 
Six, and the spare accessories and choose and buy a see packing list 
Seven, instruments used graphics, symbols, abbreviations, etc explanation 
"Ι" said power supply switch on, 
"О" said power switch close. 
"And a" said fuse to 2 amp; 
Said brightness increase

Said brightness becomes 
  Said microscope rise;

Said microscope decline.

Eight, the electrical principle diagram 
Nine, transportation and storage condition: : 
A) environment temperature range - 40 ℃ ~ 55 ℃ 
B) relative humidity of 95% or less 
C) the atmospheric pressure range is 500 hpa ~ 1060 hpa. 
D) transport requirements stipulated in the contract according to the order. Packaging good surgery microscope should be stored in a relative humidity no more than 80%, no corrosive gas and other harmful substances, well ventilated indoor.